Symbiosis of Art and Glass

STADIP ARTE H, C and M and are based on different colour application processes depending on the specification of design and are generally manufactured into laminated safety glass using PvB interlayers.

Interlayers

STADIP ARTE C, M, H	0,76 mm PvB clear or white opaque

Combinations with coloured interlayers [>]

Colours and Design specifications

Ideally you should use digitally generated data which can be transmitted to us using Corel Draw 9 or 10, Adobe Illustrator or Photoshop 5.5. The design colours are thereby already defined by you.

The colours in specification of geometric shapes (e.g. Logos) can be taken from colour systems such as RAL, Pantone or NCS.

Prior to final production, a sample which shows a full-size (1:1) extract of the image, is obligatory. The desired resolution must be defined when ordering the sample. Sample size is approx. 50 x 50 cm.

Effects

Fantasy knows no boundaries – with differing effects the glass can be seen in endless variations. Holograms in their spectral colours, Alabaster in its fragile translucency, metallic-effects with 3D-appearance or the structure of rice paper etc. give glass an unknown life.

The ability to vary colour intensity and employ different coloured glass substrates (e.g. etched or mirrored glass) allows completely individual effects to be achieved.

Even photos with differing appearances – from an opaque look on the outside and from inside sepia to grey transparency – can be achieved with STADIP ARTE C.

1. Dimensions

STADIP ARTE H	max. 1400 x 5900 mm
STADIP ARTE C	max. 1500 x 3500 mm
STADIP ARTE M	max. 1400 x 5900 mm

2. Application technical notes

• External applications
  STADIP ARTE C is suitable for external applications
  
  
• A complete self-weight support is to be achieved using prescribed setting blocks.
  
  
• When used for structural glazing STADIP ARTE must have mechanical restraints.
  
  
• Internal applications
  STADIP ARTE H and M are only suitable for interior applications. We recommend against their use in areas of high moisture.
  
  
• Injury protection and splinter-free
  At mechanical overload by impact the broken pieces of glass remain attached to the PvB interlayer and the sheet typically remains in one piece. Similar to the windscreen of a car, the risk of injury is minimised.
  
  
• Guarding
  Free-standing glass edges are not permissible. In accordance with the Austrian building regulations (OIB RL4) STADIP ARTE can - under the condition that it has total perimeter framing – be used as glass for guarding.
  
  
• Structural stability
  An increased structural stability is offered by STADIP ARTE of two sheets of PLANIDUR (heat strengthened glass).
  
  
• Thrown Ball resistance
  STADIP ARTE with a glass thickness of 2 x 4 mm and PvB interlayer fulfils the requirements of DIN 18032 Part 3 and is suitable for sports hall.
  
  
• Tolerances [>]
• [PDF] General Glazing Guidelines

3. Finishing

3.1 Edge working

Rectangular sheets of STADIP ARTE have each sheet finished with polished edges as standard.

3.2 Drilled holes and cut-outs

Drilled holes, edge and corner cut-outs are possible.

Production restrictions of hole location must be considered.