HOME DEUTSCH SEARCH & FIND SEARCH:
DLS ECKLITE SC General Info

Insulated glass with variable solar and glare control

Light and Energy - Comfort by control
efficient solar factor up to 0,07

DLS ECKLITE SC integrates an electrically operated louvre within the cavity providing efficient solar and glare control. The louvres and other integral parts are thereby permanently protected against weathering and are maintenance free. The thermal insulation up to Ug= 0,6 W/m².K fulfils all requirements for passive house architecture.

As efficient as external shades

In modern glass buildings, one needs a well-functioning solar control to avoid overheating and excess glare. DLS ECKLITE SC provides the desired level of solar control, as well as privacy and glare control by its variable controls – raising, lowering and turning of louvres. The louvres reflect light and energy and ensure the ability of the designer to create a desired level of room comfort. Depending on the type of system, a solar factor total of up to 5 % can be achieved. A level of solar control can thereby be achieved which is comparable to that of an external shade.

Function assurance

Even a high wind speeds or in a storm there are no restrictions on use.

Maintenance free

DLS ECKLITE SC Insulating glass is completely maintenance free. The protected installation in the cavity of the insulating glass permanently avoids soiling of the louvres – cleaning of the glass surface is therefore no more onerous than normal.

Ease of use/warranty

The quality and reliability of the long-term performance has been proven by the strict ift Guideline VE 07/2 – Long-term performance test. The test criteria equates to an average service life of approx. 20 years. To assure building owners for using our product, we provide a warranty of up to 10 years under the condition that motor control units - ECKLITE CONTROLLER – are used as well as commissioning being carried out by ECKELT GLAS.

 
 
 
 
 

Standard types and compositions for vertical* glazing

custom solutions are possible for sloped glazing applications

triple glazing Ug = 0,6 W/m².K
DLS ECKLITE SC 15

6 mm SECURIT ESG-FT
32 mm Argon with Louvre Type 0017, silver anodised
6 mm SECURIT ESG PLANITHERM ULTRA N
12 mm Argon
6 mm PLANITHERM ULTRA N, edges fine ground*


* for dimensions < 1300 mm we recommend the inner sheet to be SECURIT

Thermal transmission value: Ug = 0,6 W/m2.K acc. EN 673
Light transmission with opened louvre: 0,70 to EN 410
* Azimuth 0°
** Measuring TU Berlin, values acc. Test Report HK-EG11-01G116

 
DLS ECKLITE SC 15 – Louvre 0017 silver anodised
 
 

double glazing Ug = 1,2 W/m².K
DLS ECKLITE SC 15 66 mm SECURIT-FT
32 mm Argon with Louvre Type 0017, silver anodized
6 mm PLANITHERM ONE, edges fine ground*

* for dimensions < 1300 mm we recommend the inner sheet to be SECURIT

Thermal transmission value: Ug = 1,2 W/m2.K acc. EN 673
Light transmission with opened louvre: 0,77 to EN 410

* Azimuth 0°
** Measuring TU Berlin, acc. EN 410 and 13363-2

Simultaneous louvre movement

For high-end requirements with simultaneous louvre movement, angle adjustment, sun-path following – each ECKLITE Type (xx) can be supplied with an ENCODER. With DLS ECKLITE SC xx-ENC kit is possible to achieve simultaneous operation of many glass elements.

 
DLS ECKLITE SC 6 – Louvre Duo 9018 outerside silver, inside stone grey (reduced glare)
 
DLS ECKLITE SC 12 – Louvre 0001 white
 
DLS ECKLITE SC 15 – Louvre 0017 silver anodised
 
 

Electrical Controls

Modern control technology allows the adjustment (lift, lower and tilt) of the louvers.

ECKLITE SC and ECKLITE SC xx-ENC have specifically designed motorised controls (ECKLITE CONTROLLER).

Only approved motor control units (ECKLITE CONTROLLER) are to be used with ECKLITE SC und ECKLITE SC xx-ENC.

The impulses can be controlled by a manual switch, remote-control or automatically via a central control panel. ECKLITE can be controlled either individually or as part of a group of elements. These groups can be individual rooms, groups of rooms or complete facades.