System for insulated glass with point-fixings on the inner sheet only

LITE-WALL ISO is a point-fixed insulated glass with optimum system separation between safe mechanical restraints of the laminated inner sheet without penetrating to the outer sheet which achieves improved thermal insulation. Wind loads as well as self-weight of the outer sheet are carried by the silicone structural bonding to the inner sheet. In addition the outer sheet of SECURIT Fully Tempered safety glass is connected to the inner sheet with four mechanical restraints.

The patented glass fixing characterises its complete surface without any penetration to the outer sheet.

LITE-WALL ISO uses a minimum number of visible connections for maximum transparency in facades, roofs or entrances.

In connection with filigree structures it is possible to create aesthetic glass walls which generously fill interiors with daylight and which harmonise with existing building materials.

Standard composition

Outer sheet	8 mm SECURIT-H, coated, edges polished
Cavity	16 mm air „warm edge“ black stainless steel CHROMATECH PLUS spacer
Inner sheet	14 mm STADIP laminated, edges polished of: - 8 mm SECURIT-H - 0,76 mm PvB - 6 mm SECURIT-H

Thermal insulation

Glass type	Light transmission τv to DIN EN 410 in %	Total energy transmittance (g-value) to DIN EN 410	Ug- value to DIN EN 673 in W/m².K	Rw
LITE-WALL-ISO CLIMAPLUS	73	54	1,3	41 dB

Solar control

Glass type	Light transmission τv to DIN EN 410 in %	Total energy transmittance (g-value) to DIN EN 410	Ug- value to DIN EN 673 in W/m².K	Rw
LITE-WALL ISO COOL-LITE SKN 165	56	33	1,3	41 dB
LITE-WALL ISO COOL-LITE ST 150	42	35	1,3	41 dB
LITE-WALL ISO COOL-LITE SKN 174	63	40	1,4	41 dB
LITE-WALL ISO PARSOL Grey	28	29	1,3	41 dB
LITE-WALL ISO PARSOL Green	57	34	1,3	41 dB
LITE-WALL ISO ANTELIO Silver	55	45	1,4	41 dB

The values are calculated in accordance with the standards DIN EN 410 (for light and energy factors) and DIN EN 673 (for the thermal factors). The values can not only be used for assurance of product characteristics.
The tolerance is ± 3 %-points for light and energy factors and + 0,1 W/m².K for thermal conductivity.

LITE-WALL ISO is available with all solar control glass types, as well as SERALIT LITEX and STADIP COLOR from our product range.