Brought to the point

LITE-WALL MONO is a point-fixed performance unit of glass and integrated fitting.

The system bolt connections are factory pre-mounted onto the thermally toughened glass under controlled conditions.

The units can be installed vertically or to a maximum angle of 10° to the vertical. For barrier-loadings or designed-in structural stiffening of the sub-construction it may be necessary to apply for construction permission from local Building Authorities.

Successful testing has been carried out for laminated glass in barrier-loading conditions.

1. Connection principle and fittings

Fixed- and sliding support system

The newly developed ECKELT spider fittings fulfill the technical requirements of the fixed and moving support system. The patented inserts allow tolerances to be easily accommodated and ensure through correct use the performance of fixed, horizontal moving and general moving support connections.

Locations of fixed- and moving supports

Additional fittings

Technical information for applications is available as pdf files at the fitting range. DWG- and DXF-Files are only shown as drawings.

Material data sheets are available on request.

Structural certification of the connection fittings is not the responsibility of ECKELT GLAS.

2. recommended fixing locations
(view from inside)

3. Application technical notes

Permit for back-ventilated exterior wall cladding or vertical partition glazing

LITE-WALL MONO is the first point-fixed system which has been generally approved for construction in Germany by the German Institute for Building technology (DIBt) with permit number Z-70.2-19. For other European countries there is now a European technical certificate Nr. ETA-09/0143 available. The statutory regulations of each country must be accounted for in each application of LITE-WALL MONO.

Glass dimensioning

Individual structural analyses have been determined for the applications as described in the permit. The number of point-fixings (4 or 6) and the type of fitting connection (fixed or articulated) are differentiated with independent tables. The tables are divided into glass dimensions and positive/negative design wind loads.

4. Marking

LITE-WALL MONO is marked as standard in accordance with the permit